hal_gpio_v150_regs_op.h 文件参考

#include <stdint.h>
#include "common_def.h"
#include "hal_gpio_v150_regs_def.h"
#include "gpio_porting.h"

hal_gpio_v150_regs_op.h 的引用(Include)关系图:

此图展示该文件直接或间接的被哪些文件引用了:

浏览源代码.

宏定义
#define	hal_gpio_set_bit(x, y, z)   (((uint32_t)(x) & ~bit(y)) | (((uint32_t)(z) & 1U) << (uint32_t)(y)))
#define	hal_gpio_toggle_bit(x, y)   (((x) & ~bit(y)) | ((~(x)) & bit(y)))
#define	hal_gpio_read_bit(x, y)   (((uint32_t)(x) >> (uint32_t)(y)) & 1U)

函数
void	hal_gpio_v150_intr_rebase (uint32_t channel, uint32_t group)
	Init all GPIO interrupt relative regs. Disable, mask and clean all interruption status.

变量
uintptr_t	g_gpios_regs [GPIO_CHANNEL_MAX_NUM]