diag_cmd_mem_read_write.h 文件参考

#include "errcode.h"
#include "diag.h"

diag_cmd_mem_read_write.h 的引用(Include)关系图:

此图展示该文件直接或间接的被哪些文件引用了:

浏览源代码.

函数
errcode_t	diag_cmd_mem32 (uint16_t cmd_id, void *cmd_param, uint16_t cmd_param_size, diag_option_t *option)
errcode_t	diag_cmd_mem16 (uint16_t cmd_id, void *cmd_param, uint16_t cmd_param_size, diag_option_t *option)
errcode_t	diag_cmd_mem8 (uint16_t cmd_id, void *cmd_param, uint16_t cmd_param_size, diag_option_t *option)
errcode_t	diag_cmd_w1 (uint16_t cmd_id, void *cmd_param, uint16_t cmd_param_size, diag_option_t *option)
errcode_t	diag_cmd_w2 (uint16_t cmd_id, void *cmd_param, uint16_t cmd_param_size, diag_option_t *option)
errcode_t	diag_cmd_w4 (uint16_t cmd_id, void *cmd_param, uint16_t cmd_param_size, diag_option_t *option)
errcode_t	diag_cmd_mem_operate (uint16_t cmd_id, void *cmd_param, uint16_t cmd_param_size, diag_option_t *option)
bool	diag_cmd_permit_read (uintptr_t start_addr, uintptr_t end_addr)
bool	diag_cmd_permit_write (uintptr_t start_addr, uintptr_t end_addr)

函数说明

diag_cmd_mem16()

errcode_t diag_cmd_mem16	(	uint16_t	cmd_id,
		void *	cmd_param,
		uint16_t	cmd_param_size,
		diag_option_t *	option
	)

diag_cmd_mem32()

errcode_t diag_cmd_mem32	(	uint16_t	cmd_id,
		void *	cmd_param,
		uint16_t	cmd_param_size,
		diag_option_t *	option
	)

diag_cmd_mem8()

errcode_t diag_cmd_mem8	(	uint16_t	cmd_id,
		void *	cmd_param,
		uint16_t	cmd_param_size,
		diag_option_t *	option
	)

diag_cmd_mem_operate()

errcode_t diag_cmd_mem_operate	(	uint16_t	cmd_id,
		void *	cmd_param,
		uint16_t	cmd_param_size,
		diag_option_t *	option
	)

diag_cmd_permit_read()

bool diag_cmd_permit_read	(	uintptr_t	start_addr,
		uintptr_t	end_addr
	)

diag_cmd_permit_write()

bool diag_cmd_permit_write	(	uintptr_t	start_addr,
		uintptr_t	end_addr
	)

diag_cmd_w1()

errcode_t diag_cmd_w1	(	uint16_t	cmd_id,
		void *	cmd_param,
		uint16_t	cmd_param_size,
		diag_option_t *	option
	)

diag_cmd_w2()

errcode_t diag_cmd_w2	(	uint16_t	cmd_id,
		void *	cmd_param,
		uint16_t	cmd_param_size,
		diag_option_t *	option
	)

diag_cmd_w4()

errcode_t diag_cmd_w4	(	uint16_t	cmd_id,
		void *	cmd_param,
		uint16_t	cmd_param_size,
		diag_option_t *	option
	)