设备公开参数。更多...

#include <sle_device_discovery.h>

sle_announce_param 的协作图:

成员变量
uint8_t	announce_handle

uint8_t	announce_mode

uint8_t	announce_gt_role

uint8_t	announce_level

uint32_t	announce_interval_min

uint32_t	announce_interval_max

uint8_t	announce_channel_map

int8_t	announce_tx_power

sle_addr_t	own_addr

sle_addr_t	peer_addr

uint16_t	conn_interval_min

uint16_t	conn_interval_max

uint16_t	conn_max_latency

uint16_t	conn_supervision_timeout

void *	ext_param

详细描述

设备公开参数。

结构体成员变量说明

◆ announce_channel_map

uint8_t sle_announce_param::announce_channel_map

设备公开信道, 0:76, 1:77, 2:78

◆ announce_gt_role

uint8_t sle_announce_param::announce_gt_role

G/T 角色协商指示， { sle_announce_gt_role_t }

◆ announce_handle

uint8_t sle_announce_param::announce_handle

设备公开句柄，取值范围[0, 0xFF]

◆ announce_interval_max

uint32_t sle_announce_param::announce_interval_max

最大设备公开周期, 0x000020~0xffffff, 单位125us

◆ announce_interval_min

uint32_t sle_announce_param::announce_interval_min

最小设备公开周期, 0x000020~0xffffff, 单位125us

◆ announce_level

uint8_t sle_announce_param::announce_level

发现等级， { sle_announce_level_t }

◆ announce_mode

uint8_t sle_announce_param::announce_mode

设备公开类型， { sle_announce_mode_t }

◆ announce_tx_power

int8_t sle_announce_param::announce_tx_power

广播发射功率，单位dbm, 取值范围[-127, 20], 0x7F：不设置特定发送功率

◆ conn_interval_max

uint16_t sle_announce_param::conn_interval_max

连接间隔最大取值，取值范围[0x001E,0x3E80]， announce_gt_role 为 SLE_ANNOUNCE_ROLE_T_NO_NEGO 无需配置

◆ conn_interval_min

uint16_t sle_announce_param::conn_interval_min

连接间隔最小取值，取值范围[0x001E,0x3E80]， announce_gt_role 为 SLE_ANNOUNCE_ROLE_T_NO_NEGO 时无需配置

◆ conn_max_latency

uint16_t sle_announce_param::conn_max_latency

最大休眠连接间隔，取值范围[0x0000,0x01F3]， announce_gt_role 为 SLE_ANNOUNCE_ROLE_T_NO_NEGO 无需配置

◆ conn_supervision_timeout

uint16_t sle_announce_param::conn_supervision_timeout

最大超时时间，取值范围[0x000A,0x0C80]， announce_gt_role 为 SLE_ANNOUNCE_ROLE_T_NO_NEGO 无需配置

◆ ext_param

void* sle_announce_param::ext_param

扩展设备公开参数, 缺省时置空

◆ own_addr

sle_addr_t sle_announce_param::own_addr

本端地址

◆ peer_addr

sle_addr_t sle_announce_param::peer_addr

对端地址

该结构体的文档由以下文件生成:

src/include/middleware/services/bts/sle/sle_device_discovery.h