此图展示该文件直接或间接的被哪些文件引用了:

宏定义
#define	REGION_KEY_NUMS 0x1000 /* 每个区域容纳key_id的个数 */

#define	NV_ID_SYSTEM_FACTORY_AREA_START 0x0001 /* Not a real key_id , just used for region determination. */

#define	NV_ID_SYSTEM_FACTORY_MAC 0x0005 /* Not a real key_id , just used for region determination. */

#define	NV_ID_SYSTEM_XO_TRIM_TEMP_SW 0x0006 /* Temp comp switch for xo trim. */

#define	NV_ID_SYSTEM_XO_TRIM_TEMP_PARAM 0x0007 /* Temp comp fine code for xo trim. */

#define	NV_ID_SYSTEM_FACTORY_SLE_MAC 0x0008 /* SLE MAC NV KEY ID. */

#define	NV_ID_USER_FACTORY_AREA_START 0x1000 /* Not a real key_id , just used for region determination. */

#define	NV_ID_SYSTEM_NORMAL_AREA_START 0x2000 /* Not a real key_id , just used for region determination. */

#define	NV_ID_SECURE_CONN 0x2001 /* secure connect */

#define	NV_ID_OFFLINELOG_ENBALE_FLAG 0x2002 /* Offline log enable flag */

#define	NV_ID_COUNTRY_CODE 0x2003 /* Country code */

#define	NV_ID_DATA_SAMPLE 0x2004 /* Enable data sample */

#define	NV_ID_ROAM_ENABLE 0x2005 /* Enable roam */

#define	NV_ID_ROAM_OVER_DS_ENABLE 0x2006 /* Enable roam */

#define	NV_ID_SU_BFEE 0x2007 /* Enable su bfee */

#define	NV_ID_TX_LDPC 0x2008 /* Enable tx ldpc */

#define	NV_ID_RX_STBC 0x2009 /* Enable rx stbc */

#define	NV_ID_ER_SU_DISABLE 0x200A /* Enable er su disable */

#define	NV_ID_DCM_CONSTELLATION_TX 0x200B /* Enable dcm constellation tx */

#define	NV_ID_BANDWIDTH_EXTENDED_RANGE 0x200C /* Enable bandwidth extended range */

#define	NV_ID_AMSDU_TX_NUM 0x200D /* amsdu tx max num */

#define	NV_ID_AMSDU_TX_ON 0x200E /* Enable amsdu tx */

#define	NV_ID_AMPDU_AMSDU_TX_ON 0x200F /* Enable ampdu amsdu tx */

#define	NV_ID_AMPDU_TX_MAX_MPDU_NUM 0x2010 /* ampdu tx max mpdu num */

#define	NV_ID_AMPDU_RX_MAX_MPDU_NUM 0x2011 /* ampdu rx max mpdu num */

#define	NV_ID_AMPDU_TX_BAW_SIZE 0x2012 /* ampdu tx baw size */

#define	NV_ID_MAX_USER_NUM 0x2013 /* max user num */

#define	NV_ID_PA_AL_ON_ENABLE 0x2014 /* pa always on */

#define	NV_ID_CLR_IP_DISABLE 0x2015 /* Disable report lwip clr ip when disconn */

#define	NV_ID_LINKLOSS_DISABLE 0x2016 /* Disable linkloss */

#define	NV_ID_SOFTAP_FIX_DSPS 0x2017 /* Set Softap DSPS */

#define	NV_ID_FE_RX_INSERT_LOSS 0x2050 /* RF RX insert loss */

#define	NV_ID_FE_CALI_MASK 0x2051 /* RF cali mask */

#define	NV_ID_FE_CALI_DATA_MASK 0x2052 /* RF cali data mask */

#define	NV_ID_FE_TX_POWER_FCC 0x2053 /* RF TX power for FCC */

#define	NV_ID_FE_TX_POWER_ETSI 0x2054 /* RF TX power for ETSI */

#define	NV_ID_FE_TX_POWER_JAPAN 0x2055 /* RF TX power for JAPAN */

#define	NV_ID_FE_TX_POWER_COMMON 0x2056 /* RF TX power for COMMON */

#define	NV_ID_FE_RX_RSSI_COMP 0x2057 /* RF RX rssi comp */

#define	NV_ID_FE_TX_REF_POWER 0x2058 /* RF TX reference power */

#define	NV_ID_FE_TX_POWER_CURVE_HIGH 0x2059 /* RF TX power curve for high level */

#define	NV_ID_FE_TX_POWER_CURVE_LOW 0x205A /* RF TX power curve for low level */

#define	NV_ID_FE_TX_CURVE_FACTOR 0x205B /* RF TX curve factor */

#define	NV_ID_FE_CALI_DATA 0x205C /* RF cali data */

#define	NV_ID_FE_CTA_COEF_SWITCH 0x205D /* RF cta special coef switch */

#define	NV_ID_BTC_TXPOWER_CFG 0x20A0 /* btc tx power cfg */

#define	NV_ID_RADAR_1M_HOME_STA_PLATSIC 0x2100

#define	NV_ID_RADAR_1M_HALL_STA_PLATSIC 0x2101

#define	NV_ID_RADAR_1M_HOME_AP_PLATSIC 0x2102

#define	NV_ID_RADAR_1M_HALL_AP_PLATSIC 0x2103

#define	NV_ID_RADAR_2M_HOME_STA_PLATSIC 0x2104

#define	NV_ID_RADAR_2M_HALL_STA_PLATSIC 0x2105

#define	NV_ID_RADAR_2M_HOME_AP_PLATSIC 0x2106

#define	NV_ID_RADAR_2M_HALL_AP_PLATSIC 0x2107

#define	NV_ID_RADAR_3M_HOME_STA_PLATSIC 0x2108

#define	NV_ID_RADAR_3M_HALL_STA_PLATSIC 0x2109

#define	NV_ID_RADAR_3M_HOME_AP_PLATSIC 0x210A

#define	NV_ID_RADAR_3M_HALL_AP_PLATSIC 0x210B

#define	NV_ID_RADAR_1M_HOME_STA_PCB 0x210C

#define	NV_ID_RADAR_1M_HALL_STA_PCB 0x210D

#define	NV_ID_RADAR_1M_HOME_AP_PCB 0x210E

#define	NV_ID_RADAR_1M_HALL_AP_PCB 0x210F

#define	NV_ID_RADAR_2M_HOME_STA_PCB 0x2110

#define	NV_ID_RADAR_2M_HALL_STA_PCB 0x2111

#define	NV_ID_RADAR_2M_HOME_AP_PCB 0x2112

#define	NV_ID_RADAR_2M_HALL_AP_PCB 0x2113

#define	NV_ID_RADAR_3M_HOME_STA_PCB 0x2114

#define	NV_ID_RADAR_3M_HALL_STA_PCB 0x2115

#define	NV_ID_RADAR_3M_HOME_AP_PCB 0x2116

#define	NV_ID_RADAR_3M_HALL_AP_PCB 0x2117

#define	NV_ID_RADAR_RCV1 0x2118

#define	NV_ID_RADAR_RCV2 0x2119

#define	NV_ID_RADAR_RCV3 0x211A

#define	NV_ID_RADAR_RCV4 0x211B

#define	NV_ID_RADAR_RCV5 0x211C

#define	NV_ID_RADAR_RCV6 0x211D

#define	NV_ID_RADAR_RCV7 0x211E

#define	NV_ID_RADAR_RCV8 0x211F

#define	NV_ID_RADAR_CTRL 0x2140

#define	NV_ID_HILINK_ENTRY_MODE 0x2150 /* hilink entry mode */

#define	NV_ID_HILINK_CONNECT_INFO 0x2151 /* hilink connect info */

#define	NV_ID_SYSTEM_STABLE_AREA_START 0x3000 /* Not a real key_id , just used for region determination. */

#define	NV_ID_DBG_UART_BUS_ID 0x3001 /* dbg uart bus id */

#define	NV_ID_AT_UART_BUS_ID 0x3002 /* at uart bus id */

#define	NV_ID_HSO_UART_BUS_ID 0x3003 /* hso uart bus id */

#define	NV_ID_USER_STABLE_AREA_START 0x4000 /* Not a real key_id , just used for region determination. */

#define	NV_ID_USER_NORMAL_AREA_START 0x5000 /* Not a real key_id , just used for region determination. */

#define	NV_ID_RESTORE_ENABLE 0xA000 /* NV restore factory region flag */

宏定义说明

◆ NV_ID_AMPDU_AMSDU_TX_ON

#define NV_ID_AMPDU_AMSDU_TX_ON 0x200F /* Enable ampdu amsdu tx */

◆ NV_ID_AMPDU_RX_MAX_MPDU_NUM

#define NV_ID_AMPDU_RX_MAX_MPDU_NUM 0x2011 /* ampdu rx max mpdu num */

◆ NV_ID_AMPDU_TX_BAW_SIZE

#define NV_ID_AMPDU_TX_BAW_SIZE 0x2012 /* ampdu tx baw size */

◆ NV_ID_AMPDU_TX_MAX_MPDU_NUM

#define NV_ID_AMPDU_TX_MAX_MPDU_NUM 0x2010 /* ampdu tx max mpdu num */

◆ NV_ID_AMSDU_TX_NUM

#define NV_ID_AMSDU_TX_NUM 0x200D /* amsdu tx max num */

◆ NV_ID_AMSDU_TX_ON

#define NV_ID_AMSDU_TX_ON 0x200E /* Enable amsdu tx */

◆ NV_ID_AT_UART_BUS_ID

#define NV_ID_AT_UART_BUS_ID 0x3002 /* at uart bus id */

◆ NV_ID_BANDWIDTH_EXTENDED_RANGE

#define NV_ID_BANDWIDTH_EXTENDED_RANGE 0x200C /* Enable bandwidth extended range */

◆ NV_ID_BTC_TXPOWER_CFG

#define NV_ID_BTC_TXPOWER_CFG 0x20A0 /* btc tx power cfg */

◆ NV_ID_CLR_IP_DISABLE

#define NV_ID_CLR_IP_DISABLE 0x2015 /* Disable report lwip clr ip when disconn */

◆ NV_ID_COUNTRY_CODE

#define NV_ID_COUNTRY_CODE 0x2003 /* Country code */

◆ NV_ID_DATA_SAMPLE

#define NV_ID_DATA_SAMPLE 0x2004 /* Enable data sample */

◆ NV_ID_DBG_UART_BUS_ID

#define NV_ID_DBG_UART_BUS_ID 0x3001 /* dbg uart bus id */

◆ NV_ID_DCM_CONSTELLATION_TX

#define NV_ID_DCM_CONSTELLATION_TX 0x200B /* Enable dcm constellation tx */

◆ NV_ID_ER_SU_DISABLE

#define NV_ID_ER_SU_DISABLE 0x200A /* Enable er su disable */

◆ NV_ID_FE_CALI_DATA

#define NV_ID_FE_CALI_DATA 0x205C /* RF cali data */

◆ NV_ID_FE_CALI_DATA_MASK

#define NV_ID_FE_CALI_DATA_MASK 0x2052 /* RF cali data mask */

◆ NV_ID_FE_CALI_MASK

#define NV_ID_FE_CALI_MASK 0x2051 /* RF cali mask */

◆ NV_ID_FE_CTA_COEF_SWITCH

#define NV_ID_FE_CTA_COEF_SWITCH 0x205D /* RF cta special coef switch */

◆ NV_ID_FE_RX_INSERT_LOSS

#define NV_ID_FE_RX_INSERT_LOSS 0x2050 /* RF RX insert loss */

◆ NV_ID_FE_RX_RSSI_COMP

#define NV_ID_FE_RX_RSSI_COMP 0x2057 /* RF RX rssi comp */

◆ NV_ID_FE_TX_CURVE_FACTOR

#define NV_ID_FE_TX_CURVE_FACTOR 0x205B /* RF TX curve factor */

◆ NV_ID_FE_TX_POWER_COMMON

#define NV_ID_FE_TX_POWER_COMMON 0x2056 /* RF TX power for COMMON */

◆ NV_ID_FE_TX_POWER_CURVE_HIGH

#define NV_ID_FE_TX_POWER_CURVE_HIGH 0x2059 /* RF TX power curve for high level */

◆ NV_ID_FE_TX_POWER_CURVE_LOW

#define NV_ID_FE_TX_POWER_CURVE_LOW 0x205A /* RF TX power curve for low level */

◆ NV_ID_FE_TX_POWER_ETSI

#define NV_ID_FE_TX_POWER_ETSI 0x2054 /* RF TX power for ETSI */

◆ NV_ID_FE_TX_POWER_FCC

#define NV_ID_FE_TX_POWER_FCC 0x2053 /* RF TX power for FCC */

◆ NV_ID_FE_TX_POWER_JAPAN

#define NV_ID_FE_TX_POWER_JAPAN 0x2055 /* RF TX power for JAPAN */

◆ NV_ID_FE_TX_REF_POWER

#define NV_ID_FE_TX_REF_POWER 0x2058 /* RF TX reference power */

◆ NV_ID_HILINK_CONNECT_INFO

#define NV_ID_HILINK_CONNECT_INFO 0x2151 /* hilink connect info */

◆ NV_ID_HILINK_ENTRY_MODE

#define NV_ID_HILINK_ENTRY_MODE 0x2150 /* hilink entry mode */

◆ NV_ID_HSO_UART_BUS_ID

#define NV_ID_HSO_UART_BUS_ID 0x3003 /* hso uart bus id */

◆ NV_ID_LINKLOSS_DISABLE

#define NV_ID_LINKLOSS_DISABLE 0x2016 /* Disable linkloss */

◆ NV_ID_MAX_USER_NUM

#define NV_ID_MAX_USER_NUM 0x2013 /* max user num */

◆ NV_ID_OFFLINELOG_ENBALE_FLAG

#define NV_ID_OFFLINELOG_ENBALE_FLAG 0x2002 /* Offline log enable flag */

◆ NV_ID_PA_AL_ON_ENABLE

#define NV_ID_PA_AL_ON_ENABLE 0x2014 /* pa always on */

◆ NV_ID_RADAR_1M_HALL_AP_PCB

#define NV_ID_RADAR_1M_HALL_AP_PCB 0x210F

◆ NV_ID_RADAR_1M_HALL_AP_PLATSIC

#define NV_ID_RADAR_1M_HALL_AP_PLATSIC 0x2103

◆ NV_ID_RADAR_1M_HALL_STA_PCB

#define NV_ID_RADAR_1M_HALL_STA_PCB 0x210D

◆ NV_ID_RADAR_1M_HALL_STA_PLATSIC

#define NV_ID_RADAR_1M_HALL_STA_PLATSIC 0x2101

◆ NV_ID_RADAR_1M_HOME_AP_PCB

#define NV_ID_RADAR_1M_HOME_AP_PCB 0x210E

◆ NV_ID_RADAR_1M_HOME_AP_PLATSIC

#define NV_ID_RADAR_1M_HOME_AP_PLATSIC 0x2102

◆ NV_ID_RADAR_1M_HOME_STA_PCB

#define NV_ID_RADAR_1M_HOME_STA_PCB 0x210C

◆ NV_ID_RADAR_1M_HOME_STA_PLATSIC

#define NV_ID_RADAR_1M_HOME_STA_PLATSIC 0x2100

◆ NV_ID_RADAR_2M_HALL_AP_PCB

#define NV_ID_RADAR_2M_HALL_AP_PCB 0x2113

◆ NV_ID_RADAR_2M_HALL_AP_PLATSIC

#define NV_ID_RADAR_2M_HALL_AP_PLATSIC 0x2107

◆ NV_ID_RADAR_2M_HALL_STA_PCB

#define NV_ID_RADAR_2M_HALL_STA_PCB 0x2111

◆ NV_ID_RADAR_2M_HALL_STA_PLATSIC

#define NV_ID_RADAR_2M_HALL_STA_PLATSIC 0x2105

◆ NV_ID_RADAR_2M_HOME_AP_PCB

#define NV_ID_RADAR_2M_HOME_AP_PCB 0x2112

◆ NV_ID_RADAR_2M_HOME_AP_PLATSIC

#define NV_ID_RADAR_2M_HOME_AP_PLATSIC 0x2106

◆ NV_ID_RADAR_2M_HOME_STA_PCB

#define NV_ID_RADAR_2M_HOME_STA_PCB 0x2110

◆ NV_ID_RADAR_2M_HOME_STA_PLATSIC

#define NV_ID_RADAR_2M_HOME_STA_PLATSIC 0x2104

◆ NV_ID_RADAR_3M_HALL_AP_PCB

#define NV_ID_RADAR_3M_HALL_AP_PCB 0x2117

◆ NV_ID_RADAR_3M_HALL_AP_PLATSIC

#define NV_ID_RADAR_3M_HALL_AP_PLATSIC 0x210B

◆ NV_ID_RADAR_3M_HALL_STA_PCB

#define NV_ID_RADAR_3M_HALL_STA_PCB 0x2115

◆ NV_ID_RADAR_3M_HALL_STA_PLATSIC

#define NV_ID_RADAR_3M_HALL_STA_PLATSIC 0x2109

◆ NV_ID_RADAR_3M_HOME_AP_PCB

#define NV_ID_RADAR_3M_HOME_AP_PCB 0x2116

◆ NV_ID_RADAR_3M_HOME_AP_PLATSIC

#define NV_ID_RADAR_3M_HOME_AP_PLATSIC 0x210A

◆ NV_ID_RADAR_3M_HOME_STA_PCB

#define NV_ID_RADAR_3M_HOME_STA_PCB 0x2114

◆ NV_ID_RADAR_3M_HOME_STA_PLATSIC

#define NV_ID_RADAR_3M_HOME_STA_PLATSIC 0x2108

◆ NV_ID_RADAR_CTRL

#define NV_ID_RADAR_CTRL 0x2140

◆ NV_ID_RADAR_RCV1

#define NV_ID_RADAR_RCV1 0x2118

◆ NV_ID_RADAR_RCV2

#define NV_ID_RADAR_RCV2 0x2119

◆ NV_ID_RADAR_RCV3

#define NV_ID_RADAR_RCV3 0x211A

◆ NV_ID_RADAR_RCV4

#define NV_ID_RADAR_RCV4 0x211B

◆ NV_ID_RADAR_RCV5

#define NV_ID_RADAR_RCV5 0x211C

◆ NV_ID_RADAR_RCV6

#define NV_ID_RADAR_RCV6 0x211D

◆ NV_ID_RADAR_RCV7

#define NV_ID_RADAR_RCV7 0x211E

◆ NV_ID_RADAR_RCV8

#define NV_ID_RADAR_RCV8 0x211F

◆ NV_ID_RESTORE_ENABLE

#define NV_ID_RESTORE_ENABLE 0xA000 /* NV restore factory region flag */

◆ NV_ID_ROAM_ENABLE

#define NV_ID_ROAM_ENABLE 0x2005 /* Enable roam */

◆ NV_ID_ROAM_OVER_DS_ENABLE

#define NV_ID_ROAM_OVER_DS_ENABLE 0x2006 /* Enable roam */

◆ NV_ID_RX_STBC

#define NV_ID_RX_STBC 0x2009 /* Enable rx stbc */

◆ NV_ID_SECURE_CONN

#define NV_ID_SECURE_CONN 0x2001 /* secure connect */

◆ NV_ID_SOFTAP_FIX_DSPS

#define NV_ID_SOFTAP_FIX_DSPS 0x2017 /* Set Softap DSPS */

◆ NV_ID_SU_BFEE

#define NV_ID_SU_BFEE 0x2007 /* Enable su bfee */

◆ NV_ID_SYSTEM_FACTORY_AREA_START

#define NV_ID_SYSTEM_FACTORY_AREA_START 0x0001 /* Not a real key_id , just used for region determination. */

◆ NV_ID_SYSTEM_FACTORY_MAC

#define NV_ID_SYSTEM_FACTORY_MAC 0x0005 /* Not a real key_id , just used for region determination. */

◆ NV_ID_SYSTEM_FACTORY_SLE_MAC

#define NV_ID_SYSTEM_FACTORY_SLE_MAC 0x0008 /* SLE MAC NV KEY ID. */

◆ NV_ID_SYSTEM_NORMAL_AREA_START

#define NV_ID_SYSTEM_NORMAL_AREA_START 0x2000 /* Not a real key_id , just used for region determination. */

◆ NV_ID_SYSTEM_STABLE_AREA_START

#define NV_ID_SYSTEM_STABLE_AREA_START 0x3000 /* Not a real key_id , just used for region determination. */

◆ NV_ID_SYSTEM_XO_TRIM_TEMP_PARAM

#define NV_ID_SYSTEM_XO_TRIM_TEMP_PARAM 0x0007 /* Temp comp fine code for xo trim. */

◆ NV_ID_SYSTEM_XO_TRIM_TEMP_SW

#define NV_ID_SYSTEM_XO_TRIM_TEMP_SW 0x0006 /* Temp comp switch for xo trim. */

◆ NV_ID_TX_LDPC

#define NV_ID_TX_LDPC 0x2008 /* Enable tx ldpc */

◆ NV_ID_USER_FACTORY_AREA_START

#define NV_ID_USER_FACTORY_AREA_START 0x1000 /* Not a real key_id , just used for region determination. */

◆ NV_ID_USER_NORMAL_AREA_START

#define NV_ID_USER_NORMAL_AREA_START 0x5000 /* Not a real key_id , just used for region determination. */

◆ NV_ID_USER_STABLE_AREA_START

#define NV_ID_USER_STABLE_AREA_START 0x4000 /* Not a real key_id , just used for region determination. */

◆ REGION_KEY_NUMS

#define REGION_KEY_NUMS 0x1000 /* 每个区域容纳key_id的个数 */